website security Klicken Sie hier, um Google Analytics-Tracking zu deaktivieren

Parts / accessories

Spare parts


Display per page
Sort by
1 - 30 of 57 results
Product no.: MB-ET-0001-12

Only for 6 volts to 12 volts converted vehicles!

Fits the following models: "AR type 22" for Mercedes Ponton 180 (yoc 53-57) with engine M 136 / 52HP (bottom camshaft - engine from the 170) and all 170 Mercedes models).

490.00 *
Delivery weight: 2 kg

In stock

Product no.: MB-ET-0001-6

Fits the following models: vehicle list

490.00 *
Delivery weight: 2 kg

In stock

Product no.: MB-ET-0012-4

The 1,2,3-ignition is fully electronic and is simply used instead of the original ignition distributor.
Advantages: You can return the original part and upgrade at any time. Other solutions are placed on the old unit and take over its accuracy, eg Shock wave side by leaking storage etc.

299.00 *
Delivery weight: 0.75 kg

In stock

Product no.: MB-ET-0012-4P

The 1,2,3-ignition is fully electronic and is simply used instead of the original ignition distributor.
Advantages: You can return the original part and upgrade at any time. Other solutions are placed on the old unit and take over its accuracy, eg Shock wave side by leaking storage etc.

Freely programmable, two ignition curves can alternately be accessed during operation. Allows best fit the ignition curve to the engine by comparison.

380.00 *
Delivery weight: 0.75 kg

In stock

Product no.: MB-ET-0012-4PA

The 1,2,3-ignition is fully electronic and is simply used instead of the original ignition distributor.
Advantages: You can return the original part and upgrade at any time. Other solutions are placed on the old unit and take over its accuracy, eg Shock wave side by leaking storage etc.

Freely programmable, two ignition curves can alternately be accessed during operation. Allows best fit the ignition curve to the engine by comparison.

The top model with app interface for monitoring via mobile phone. Your mobile is the engine test bench!

460.00 *
Delivery weight: 0.75 kg

In stock

Product no.: MB-ET-0012-6

The 1,2,3-ignition is fully electronic and is simply used instead of the original ignition distributor.
Advantages: You can return the original part and upgrade at any time. Other solutions are placed on the old unit and take over its accuracy, eg Shock wave side by leaking storage etc.

320.00 *
Delivery weight: 0.8 kg

In stock

Product no.: MB-ET-0012-6P

The 1,2,3-ignition is fully electronic and is simply used instead of the original ignition distributor.
Advantages: You can return the original part and upgrade at any time. Other solutions are placed on the old unit and take over its accuracy, eg Shock wave side by leaking storage etc.

Freely programmable, two ignition curves can alternately be accessed during operation. Allows best fit the ignition curve to the engine by comparison.

400.00 *
Delivery weight: 0.8 kg

In stock

Product no.: MB-ET-0012-6PA

The 1,2,3-ignition is fully electronic and is simply used instead of the original ignition distributor.
Advantages: You can return the original part and upgrade at any time. Other solutions are placed on the old unit and take over its accuracy, eg Shock wave side by leaking storage etc.

Freely programmable, two ignition curves can alternately be accessed during operation. Allows best fit the ignition curve to the engine by comparison.

The top model with app interface for monitoring via mobile phone. Your mobile is the engine test bench!

480.00 *
Delivery weight: 0.8 kg

In stock

Product no.: MB-ET-0015

Brake line kit for Ponton vehicles with brake booster.

160.00 / set(s) *
Delivery weight: 1 kg

In stock

Product no.: MB-ET-0016

Brake line kit for Ponton vehicles without brake booster.

140.00 / set(s) *
Delivery weight: 0.6 kg

In stock

Product no.: RLL-0001

Chrome trim kit for Mercedes-Benz Ponton Cabrio + Coupé in raw brass with good quality, 10 pieces (complete set only).

2,190.00 / set(s) *
Delivery weight: 13 kg

Delivery time: 1-4 weeks.

Product no.: MB-ET-0006

Eight of these springs get pushed back the folding of the folding roof, whether four-cylinder or six cylinder.

These springs will break and the soft top and then goes "across" and wedged in the guide. Often an overload of the springs by well-intentioned rearing of heavy soft top instead of the standard cover-Covertex debt is on break. When replacing the cover, it is advisable to inspect the feathers closely and replaced if necessary. Later, they hardly serve up some feathers!

25.00 *
Delivery weight: 0.02 kg

In stock

Product no.: MB-ET-0008

MB-reference number: 120 781 0321 and 120 781 0421

2nd Type "long", show not for the folding roofs in the open state, the folding back of the sky. He disappears into a kind of tape. Approximately up to yoc 56 these parts were built for rooftops.

70.00 / set(s) *
Delivery weight: 0.04 kg

In stock

Product no.: MB-ET-0009

MB-Reference Number: 136 783 0086

18.00 *
Delivery weight: 0.02 kg

In stock

Product no.: MB-ET-0010

MB reference anchor plate: 120 781 0020, threaded plate: 120 657 0011

50.00 / set(s) *
Delivery weight: 0.1 kg

In stock

Product no.: MB-ET-0005

MB-ET-Referenznummer: 120 781 0122 und 120 781 0222

140.00 / set(s) *
Delivery weight: 0.05 kg

In stock

Product no.: MB-ET-0026

Locking bar (timber) series 1 for Webasto folding sunroof for repair.

250.00 *

In stock

Product no.: MB-ET-0027

6-teilig - zur Reparatur.

980.00 / set(s) *
Delivery weight: 4 kg

Delivery time: 1-4 weeks.

Product no.: MB-ET-0002

Referenz-Bestellnummer bei Mercedes: 120 671 0020

72.00 *
Delivery weight: 1.2 kg

Delivery time: 1-4 weeks.

Product no.: MB-ET-0002-H

Windshield rubber, rear 120 678 0020 - Mercedes-Benz Ponton Limousine

67.00 *
Delivery weight: 1.2 kg

In stock

Product no.: MB-ET-0028

MB-ET Reference Number: 30 136 779 0036

We only sell in pairs.

65.00 / set(s) *
Delivery weight: 0.05 kg

In stock

Product no.: MB-ET-0029

MB-ET Reference no. (replaces) 180 887 0279 (if bonnet falls itself)

We sell only in pairs.

65.00 / set(s) *
Delivery weight: 0.05 kg

In stock

Product no.: MB-ET-0030

MB-ET-Reference: replaces 120 758 0127 (if the lid does not hold in "open position" on its own)

We only sell in pairs.

65.00 / set(s) *
Delivery weight: 0.05 kg

In stock

Product no.: MB-ET-0031

Canopy closure - Mercedes-Ponton Convertible Repro = handle, lock and stops

MB ET No.: 180 770 0126/180 770 0326 Hood catch left MB ET No.: 180 770 0226/180 770 0426 Hood catch right

980.00 / set(s) *
Delivery weight: 0.05 kg

In stock

Product no.: MB-ET-0050-74

Spare plan number: 74 - no: 180 616 0171

This metal sheet is welded firmly in a convertible for reinforcement of the soil. We have made it in the sheet thickness of 2mm.

190.00 *
Delivery weight: 5 kg

In stock

Product no.: MB-ET-0050-75

Spare plan number: 75 - no: 180 616 0217

This metal sheet is welded firmly in a convertible for reinforcement of the soil. We have made it in a sheet thickness of 2mm.

190.00 *
Delivery weight: 5 kg

In stock

Product no.: MB-ET-0051-59A

Spare plan number: 59a - no: 30 180 616 0167

On the drawing part 59 and 60. We have manufactured this sheet in two parts, 59a and 59b now = driver's side, as well as 60a and 60b = passenger side. Usually a part sheet is sufficient to repair, and one wants to save as much as possible from the original sheet substance.
The original, evaginated water processes are executed as in the original, see spare plan.

270.00 *
Delivery weight: 2 kg

In stock

Product no.: MB-ET-0051-59B

Spare plan number: 59b - no: 30 180 616 0167

On the drawing part 59 and 60. We have manufactured this sheet in two parts, 59a and 59b now = driver's side, as well as 60a and 60b = passenger side. Usually a part sheet is sufficient to repair, and one wants to save as much as possible from the original sheet substance.
The original, evaginated water processes are executed as in the original, see spare plan.

300.00 *
Delivery weight: 2 kg

In stock

Product no.: MB-ET-0051-60A

Spare plan number: 60a - no: 30 180 616 0267

On the drawing part 59 and 60. We have manufactured this sheet in two parts, 59a and 59b now = driver's side, as well as 60a and 60b = passenger side. Usually a part sheet is sufficient to repair, and one wants to save as much as possible from the original sheet substance.
The original, evaginated water processes are executed as in the original, see spare plan.

270.00 *
Delivery weight: 2 kg

In stock

Product no.: MB-ET-0051-60B

Spare plan number: 60b - no: 30 180 616 0267

On the drawing part 59 and 60. We have manufactured this sheet in two parts, 59a and 59b now = driver's side, as well as 60a and 60b = passenger side. Usually a part sheet is sufficient to repair, and one wants to save as much as possible from the original sheet substance.
The original, evaginated water processes are executed as in the original, see spare plan.

300.00 *
Delivery weight: 2 kg

In stock

*
Prices incl. VAT, plus delivery
1 - 30 of 57 results